 | Tool Box Cable Access Kit Ref: TBCAK
10 x 330mm glass reinforced polyester rod set for gaining access to and for laying. wires and cables under floor boards, in ceiling ducts, trunking and wall cavities. Includes hook end, ring end and flexi extender.
Price: £8.90£10.46 (Including: VAT at 17.5%)
|
|
|
 | Cable Access Kit Ref: CAK
Use where longer cable runs in confined spaces are required. 10 x 1 metre glass reinforced polyester rods set. This rod set is unbeatable for running cables under floorboards or through ceiling ducts. Includes hook end, ring end and flexi extender
Price: £14.89£17.50 (Including: VAT at 17.5%)
|
|
|
 | Fish Tapes Ref: FT
For pulling cable through conduit, under floors and inside cavities. Flexible spring steel with eyed end. Side handle and brake. 30 metres
Price: £13.30£15.63 (Including: VAT at 17.5%)
|
|
|
 | Hi-Spec 750W SDS+ Hammer Drill Ref: Hi-Spec SDS
A high performance SDS drill that will easily and quickly punch holes in masonary and concrete. Ideal for running cables through walls.
Three function SDS Plus drill with hammer stop and rotor stop. 750W motor. 0-8800RPM. Variable speed, reversible, safety clutch, depth rod and adjustable handle., supplied in a carrying case.
Maximum capacities; wood 30mm, steel 13mm, concrete 26mm. Core drill maximum 65mm.
3 YEAR GUARANTEE
Price: £43.40£51.00 (Including: VAT at 17.5%)
|
|
|
 | Pro Range 24V SDS+ Hammer Drill Ref: PRO 24V SDS
A cordless power drill, ideal for use up ladders or in confined spaces. 24V SDS+ Hammer drill with 3 functions; drill, hammer drill and chisel. 2x2.3Ah Ni-mH batteries, variable rate charger, variable speed, 0-800RPM and 0-4250BPM, impact energy 1.7J, bit storage in hanlde, depth gauge. Carrying case. Max capacities:- Wood 20mm, steel 10mm, concrete 20mm. Kit includes 13mm keyed chuck with adaptor and 3 x drill bits (6x120/8x150/12x150mm).
3 YEAR GUARANTEE
Price: £186.30£218.90 (Including: VAT at 17.5%)
|
|
|
 | 12 pce SDS Plus Drill & Steel Set Ref: 12PSDS
A set of 12 SDS Plus accessories, essential for drilling large holes in stone or brickwoork.
Drilles: 5.5, 6.0 x 110mm, 8,10, 12 x 160mm, 14, 16 x 210mm, 18 300mm and 20 x 450mm.
Chisels: 1 x point, 1 x flat and 1 x groove.
Supplied with a cary case.
Price: £11.99£14.09 (Including: VAT at 17.5%)
|
|
|
 | Digital Multimeter Ref: DIGIMULT
Essential for checking voltages, current and cable connections.
Measures DC and AC voltage, DC current and resistance. Continuity checker, Diodes, NPN and PNP transistor checker. Supplied with test leads.
Price: £4.44£5.22 (Including: VAT at 17.5%)
|
|
|
 | Pro Digital Multimeter Ref: PRODIGIMULT
A high specification multimeter with a protective case. Measures DC and AC voltage, current and resistance. Continuity checker, Diodes, NPN and PNP transistor checker. Supplied with test leads.
Price: £13.97£16.41 (Including: VAT at 17.5%)
|
|
|
 | RJ45 Crimp Tool Ref: CATT960
Used for crimping RJ45 plugs onto cable.
Suitable for RJ45 8p8c, RJ11 6p6c and RJ12 6p6c.
Built-in wire strippers and cutters.
Price: £9.99£11.74 (Including: VAT at 17.5%)
|
|
|
 | Ratchet Crimp Tool RG58, RG59 Ref: TOOL1
The essential tool for crimping BNC connectors on to RG59 cable. Make your own high quality CCTV cables. Cable laying is much easier if using bare cable. You can drill smaller holes in walls, thread the cable through, then crimp on the connectors. This eay to use toll is suitable for RG59 and RG58 cable.
Price: £14.46£16.99 (Including: VAT at 17.5%)
|
|
|
 | Rotary Cable Stripper RG59,CT100 Ref: TOOL4
A simple cable stripper that will strip the outer and inner sheaths of coaxial cable at the correct place to allow the easy fitment of a crimp type BNC connector. Suitable for RG59 and CT100 cable.
Price: £9.32£10.95 (Including: VAT at 17.5%)
|
|
|
 | Expert Rachet Crimpers Ref: TOOL615
Expert quality ratchet crimping pliers with hardened steel jaws. Precision ratchet guarantees complete crimping. Suitable for the following crimp terminals Red 0.5 - 1mm2, blue 1.5 -2.5mm2, yellow 4 -6 mm2.
Price: £12.95£15.22 (Including: VAT at 17.5%)
|
|
|
 | 33 Pce Security Bit Set Ref: 33SBS
33pce set of security bits compatible with most current tamper proof fastening systems. Includes bit holder and case.
Price: £5.12£6.02 (Including: VAT at 17.5%)
|
|
